Since the beginning of this year, Tuha Oilfield has established a "highway" for shale oil, tight oil and other reservoirs through various fracturing methods, so that beneficial oil can emerge from the rock joint. So far this year, the field has fracked 38,000 tons of oil, a 15% increase over the same period last year, and the cost has fallen by 10%. The new strata in Tuha oilfiel

1. Inspection of appearance and logo Check content: whether the appearance of the valve has defects, such as cracks, bubbles, dents, etc. Check signage, nameplate and finish for compliance. Standards: International standards including API 598, ASME B16.34, ISO 5208, etc. Chinese standards include GB/T 12224 (general requirements for steel valves), GB/T 12237 (steel ball valv

Ball valve has many kinds of structure, but basically the same little difference, are the opening and closing parts for the round ball core, mainly by the valve seat, ball, sealing ring, stem and other driving devices, etc., through the stem rotation 90 degrees to achieve the opening and closing of the valve, in the pipeline for shutting off, distribution, adjust the flow size and change

On August 22, the oil and gas produced by the oil Wells under the supervision of Wangxuzhuang Oilfield in Dagang was directly transported to the joint station, and low-carbon and efficient operation was realized through the first-level distribution station. In order to promote green development, Dagang Oilfield has gradually promoted the application of a new surface system model.

In the thermal system, the thermal trap plays a very important role, and its performance directly affects the stability and energy efficiency of the steam system. As the key equipment in the steam system, the thermal trap can not only automatically remove condensate, prevent the occurrence of water hammer phenomenon, but also effectively prevent the leakage of steam to ensure the

As of October 31, 1,750 Wells had been drilled and 997 Wells had been put into operation in the production capacity construction of the self-operating area of Changqing Gas field, with the gas contribution of new Wells reaching 1.15 billion cubic meters, and the quality and efficiency of gas field development had been improved, ensuring the long-term energy storage of natural gas

Gate valves usually have single gate, double gate, wedge, parallel and other structural designs, in which wedge double gate (Z42, Z62 series) and wedge elastic gate (Z40, Z60 series) are the most widely used, the former is closed, the gate automatically fits both sides of the seat, automatically compensates the wedge Angle processing position error; The latter relies on the elasti

The sealing performance of the valve directly affects the control effect of the fluid medium and the safe operation of the system, the grinding of the valve sealing surface is one of the important means to ensure its sealing performance, its main purpose is to eliminate the uneven sealing surface, defects and particles, improve the surface smoothness and roughness, so as to achiev

Sealing surface is the most critical working face of the valve, the quality of the sealing surface directly affects the service life of the valve, and the material of the sealing surface is an important factor to ensure the quality of the sealing surface. Therefore, the following factors should be considered when selecting valve sealing surface materials: ① Corrosion resistance.

On September 19, the oil production plant No. 3 of Huabei Oilfield, which had been shut down for more than 4 years due to high water cut, opened the well with ultra-short radius horizontal well technology, and the daily oil production reached 11 tons, which has been stable for 48 consecutive days. In Huabei Oilfield, ultra-short radius horizontal well technology is used to excavat

The electric actuator of valve ‍ is used to control the valve. If the valve cannot be opened and closed due to some factors, such as power failure, failure of the electric actuator, or is fixed in a certain position, it needs to be operated by hand wheel. So, what should we pay attention to when the valve actuator ‍ needs to be manually operated? Matters needing atte

Pressure valve is a device used in hydraulic system to control and regulate liquid flow pressure. Its working principle is based on the balance between the liquid pressure on the spool and the spring force. When the pressure in the hydraulic system exceeds the pressure set by the seat, the seat will be subjected to upward force, so that the disc is separated from the seat, and th

Because the seal plays a role in cutting and connecting, adjusting and distributing, separating and mixing media on the valve channel, the sealing surface is often subjected to medium corrosion, erosion, wear and easily damaged. The reasons for the damage of sealing surface are man-made damage and natural damage. Artificial damage, is due to the design and manufacture not jing, m

Reed ponds, rice fields, oil Wells criss-cross, Liaohe Oilfield Huanxiling oil production plant is located in the "wetland capital" reputation of Panjin. In the past six years, Liaohe Oilfield has actively organized the withdrawal of more than 900 square kilometers of protected areas, and invested a lot of funds to complete the shutdown and withdrawal of equipment and facilities

01, cleaning method The welding slag, rust, and residue in the pipeline cause blockage or jam in the throttle orifice, guide part, and balance hole of the lower valve cover, resulting in strain and scratch on the spool surface and guide surface, and indentation on the sealing surface. This often occurs in the initial phase of operation after a new system is put into operation and